Water Purification Unit

General information

System capable of producing safe drinking water from biologically contaminated fresh water sources such as lakes, streams, ponds and wells.

Performance 5,000 to 10,000 l/h depending on raw water quality.

Self contained. Modular construction allows moving each module easily by hand. Field portable, trailer option available. Fitted for airlift. Fast set-up in 30 minutes or less. Can be put in a Land Cruiser PU or SW.

Specifications

Direct fuel injection. Hand Start. Air cooled. Variable speed control. Exhaust silencer. Oil and fuel filters. Output approx 4.3 kW at 3600 rpm.

Consumption 1.5 l/h

2” Centrifugal Self-priming pump in all bronze & stainless steel construction. Turbine driven slurry mixing with automatic precoating of diatomite earth filter Welded aluminum channel main frame. Replaceable “A” skid supports Tubular aluminum protective cage. Aluminum modular frames. Powder
coated / polyurethane finish.

The system consists of a 10 m3 ISOframed tankrack with an organic water pump. The tankrack have a filling stand, a hose reel, and bulk suction and discharge hoses. The CAMEL has an integrated thermal regulating module. This will prevent freezing during cold weather operations. It will also chill water during hot-weather operations in order to increase water palatability for the soldier. The CAMEL, when full, is capable of being transported by C-130 and larger aircraft. The CAMEL has a filling stand for jerry cans and canteens. It will increase unit water storage, and decrease required spare parts. The CAMEL enhances water distribution byproviding one system that enables both hard wall bulk water transportation and unit retail water support. It allows for water transport directly from water purification points to supported manoeuvre elements and can be used as a water distribution point. The CAMEL is self driven and there is no need for external support during use on vehicle or on ground. A built-in aggregate provides electric power supply and it is simple to operate and maintain.

Excellent experience from operations in Kosovo and in the Norwegian Army

The complete Water Purification System is in accordance with the requirements for producing drinking water following WHO guidelines for safe drinking water.

The 20’ ISO container will accommodate a complete Water Purification Plant. The system is capable of purifying approximately 7500 litres /hour of fresh water and 2500 litres/hour of sea water, and will remove 100% parasites and metals 98-99% bacteria, virus, dirt toxins etc.

Following filtration, the water is stored in a 4000 litres stainless-steel storage tank. The entire system works free of chemicals and have no harmful discharges to the environment. The complete system consists of three parts, utilized in various combinations depending on the raw water quality.

The first part of the system is based on the use of a pressure filter in combination with a mineral filter. Followed by second part consisting of a softener which is then followed by reversed osmosis membranes for desalination of sea-water containing up to 40 000 ppm of salt. Our experiences from the manufacturing, running and servicing of complete systems have been the key parts in our development.

Our system, based on pressure filter and UV filter in combination with chlorine dosage for residual effect, have a proven capability to produce clean and safe drinking water from heavy polluted fresh water sources.

Why use the Uniteam Water Purification Unit? High capablity (approx. 7500 litres/hour of fresh water and 2500 litres/hour of sea water)

Will remove 100% parasites and metalsCapacity to filter particles down to a size of 1micron 95-98 per cent of bacteria and parasites are removed. The treated water meets the WHO drinking water standard

Technical specifications:

• Pump: Aluminum alloy pump case,
• Centrifugal, self-suck
• Inlet/outlet diameter (mm) : 100 (4.0")
• Max. head: 30m
• Max, suction head: 8m
• Max. flow: 96m3/h
• Engine mode: GH177F
• Max. output:9.0HP
• Displacement (ml): 270
• Engine speed (RPM): 3600
• Fuel: Unleaded Gasoline
• Fuel tank capacity: 6L
• Oil: Engine oil SD or higher
• Oil capacity: 1.1L
• Oil alert: Optional
• Ignition system: T.C.I
• Starting system: Recoil (+electric)
• Overall dimensions: 650 x 480 x 540mm
  (5.32cuft/5.95cuft)
• Net weight/gross weight: 43/45kg
  (94.80lbs/ 99.21lbs)

Engine features:

• 4 stroke, air cooled, naturally aspirating
• Muti (single)-cylinder
• Variable speed control
• Up to 4 hr hours mounted fuel tank with
• fuel agglomeratuor
• 12 volt key type electric start battery
• Charging and mounted battery plus emergency manual start
• Replaceable element air and oil filters

Area of use :

• Used for handling fluids with solid particle contents

Desecription:

• 4’’(100 mm)x4(100mm)self priming centrifugal pump coupled to a diesel engine and mounted on a 2 OR 4 wheel site trolley

Operating conditions:

• Water temperature: 4-80
• Ambinet temperature: Upto 50
• Altitude: Upto 1000 m AMSL

Quality requirements:

• International standards

Pump features:

• Full tubing frame for protection and easy transport
  
• Premium light aluminum alloy case for portability
  
• Recoil starter combined with electric start for your more effective and convenient operation
  
• Oil gauge for easily adding correct oil
• Engine switch with armor ensures reliable flameout
• Compact designed Pipe interface
• Specially structured muffler reduces noise
  
• Aslant designed cylinder for lower vibration
  
• Splash lubricating are designed to save power
  
• Full speed controller, OHV engine and advanced structure for reliable power and abundant flow
  

Accessories:

• Operators, maintenance and spare parts manuals for pump and engines
• Tool kit for routine maintenance
• Spare parts for 2000 hours operation
  

Engine features:

• 4 stroke, air cooled, naturally aspirating
• Muti (single)-cylinder
• Variable speed control
• Up to 4 hr hours mounted fuel tank with fuel agglomeratuor
• 12 volt key type electric start battery
• Charging and mounted battery plus emergency manual start
  
• Replaceable element air and oil filters
  

Packing:

Each pump set complete with accessories to be packed in strong wooden case suitable for sea/air freight or storage in dry conditions for upto six months, one packing list in strong plastic bag to be attached to outside of case and one packing list to be placed inside box.

After unloading the CAMEL will work immediately.

The CAMEL could also be constructedwith the NATO hook lift system. The system consists of a 10 m3 ISOframed tankrack with an organic water pump. The tankrack have a filling stand, a hose reel, and bulk suction and discharge hoses. The CAMEL has an integrated thermal regulating module. This will prevent freezing during cold weather operations. It will also chill water during hot-weather operations in order to increase water palatability for the soldier.

The CAMEL, when full, is capable of being transported by C-130 and larger aircraft. The CAMEL has a filling stand for jerry cans and canteens. It will increase unit water storage, and decrease required spare parts. The CAMEL enhances water distribution byproviding one system that enables both hard wall bulk water transportation and unit retail water support. It allows for water transport directly from water purification points to supported
manoeuvre elements and can be used as a water distribution point. The CAMEL is self driven and there is no need for external support during use on vehicle or on ground.

• Pump, hoses and connections in austenitic stainless steel.
• A built-in aggregate provides electric power supply and it is simple to operate and maintain.
• Excellent experience from operations in
• Kosovo and in the Norwegian Army